|
|
<p><span>彩超维修现在大多是软件问题，彩超的PC部分大部分是和普通电脑一样的，所以我在这里分享下我装系统的经验。</span><br /></p><p><span><br /></span></p><p><span>工具/原料 <br /></span></p><p><br /></p><p><span>logiq C3或logiq C3的软件盘（System & Application Software）</span></p><p><br /></p><p><span>方法/步骤 <br /><br /></span></p><p><span>1 Insert the disk labeled “System & Application Software” into the DVD ROM drive.</span></p><p><span>插入我们上面提到的软件盘到dvd光驱里。<br /></span></p><p><br /><span>2 Properly turn off the scanner by momentarily pressing the Power On/Off Switch. Select “Shut Down” from the System Exit menu</span></p><p><span>正常关闭设备开关 然后从弹出的菜单中选择 “Shut Down（关机）”<br /></span></p><p><span>If the system will not shutdown normally, hold down the Power On/Off Switch until the light turns from green to amber</span></p><p><span>如果系统不能正常关机 ，请按住电源开关键 大约30秒， 系统会强制关闭 ，指示灯会从绿色变为黄色。<br /></span></p><p><br /><span>3 Turn on the system. System will detect the DVD-RW automatically.</span></p><p><span>打开机器，机器将会自动选自从DVD-RW运行。<br />Press any key to continue when below message display as shown below.</span></p><p><span>直到显示器最下方出现“Press any key to continue”字样 说明机器已经读取光驱光盘的内容了，这是能否继续的关键。<br /></span></p><p><br /><p><img src="image/20201019/807fec1585ab387096df06a3bf8cf754_1.jpg" /></p></p><p><br /></p><p><span>4 出现上面内容大家可以按任意键继续</span></p><p><span>Select on</span><wbr /><span>e of the options for loading the system. Select choice 1] to load the complete disk.</span></p><p><span>手册提示选一进行系统安装。</span></p><p><br /></p><p><span>这里我说下选1和2的区别</span></p><p><br /></p><p><span>选1一般情况都是我们给机器换新硬盘，或者机器中了病毒对全盘进行</span></p><p><span>格式化。</span></p><p><br /></p><p><span>选2 这种就是针对老机器里面有用户参数和数据的 可以选2不会破坏数据。<br /></span></p><p><br /><p><img src="image/20201019/f854e6fdaa9ac004092dc7310ee55c49_2.jpg" /></p></p><p><br /></p><p><span>5 接着步骤4我们选一 会看见以下界面</span></p><p><span>Press any key to continue when below message display as shown below.</span></p><p><span>下面的消息显示“Press any key to continue”，如下图所示。</span></p><p><br /><p><img src="image/20201019/e454347d186dfe39914c385885b12503_3.jpg" /></p></p><p><br /></p><p><span>6 接着步骤5我们按任意键，会看见以下界面。</span></p><p><span>System CD will be loaded as shown in the screen below.</span></p><p><br /></p><p><span>如图所示 会出现我们常见的GHOST的界面 这就是系统正在恢复等待进度条完成。</span></p><p><br /></p><p><p><img src="image/20201019/f6f7e68077244fd9d90c69f01c9a8b80_4.jpg" /></p></p><p><br /></p><p><span>7 System updating finished,</span></p><p><span>系统升级完成就会出现以下界面 如图：<br /></span></p><p><br /><p><img src="image/20201019/a85eb730ee25101a6bca737edf83d61b_5.jpg" /></p></p><p><br /></p><p><span>8 Press power key to reboot system, then remove the CDROM from the drive immediately. When system first time boot up after upgrading complete, type Serial Number and Option Key before starting up</span></p><p><span>重启彩超机器 拿出系统光盘 等待系统启动后 输入序列号和选项密钥</span></p><p><span>注意：千万要备份好序列号和选项密钥，否则非常麻烦。</span></p><p><br /></p><p><p><img src="image/20201019/df1c2eb09b3189e573942cb954365e1d_6.png" /></p><br /></p>
|
|
发表于 2020-10-19 14:38:46